First, Create a new Dial Up Connection
- From the Start menu, click on Connect
To
- At the bottom of the Select a Network to connect to window
click on Set up a connection or network.
- In the Choose a connection option click Set
up a dial-up connection.
- Click Next. Enter the required information for
the connection:
Dial-up phone number: (click here for a local number)
User Name: (the Saw.net account that was assigned
to you)
Password: (the password chosen by you when you
registered)
Remember this password(check this box)
Connection Name: Saw.net
Allow other people to see this connection: Check
this if you want this connection for all users on your computer
(recommended)
Note: if you have Call Waiting, temporarily disable it for the
duration of your connection by using *70,,[number] (ex.
*70,,427-1160) as
the phone number.
-
Click Connect to create and save this connection.
If your computer is not currently plugged into a phone jack, the
connection will fail, but you can click Set up the connection
anyway to save the connection for future use.You have
successfully created a Dial-up Connection in Windows Vista.
Back to top
Then, Add DNS Server Information
- Click Start, Connect to.
- Left click on the Saw.net icon and click Connect at
the bottom of the window.
- The dial up window will pop up. Click Properties.
- Click on the Networking tab. Click on Internet
Protocol v4, and then click Properties.
- Near the bottom half of this General tab, click the button
next to Use
the following DNS server addresses:
Preferred DNS Server: 205.162.201.2
Alternate DNS Server: 204.119.0.2
- Click OK, then OK again.
- You can click Dial to connect.
Finally, You're Done!
Back to top
To Connect to the Internet
- Click on Start, and then Connect To.
- Left click on the Saw.net dialup-up
connection and select Connect at the bottom.
- The Dial-up windows will come up. Simply click on Dial and
your computer will connect to Saw.net
Back to top
|
